HIGHSIDER LED Sequence flasher STS 1, E-approved.
For front / rear suitable.
Shapely flasher housing made of aluminium. Dark glass, clear edges alternating with slight curves give theIndicators a modern design. With the STS 1 LED turn signal, which fits perfectly to almost every machine, thanks to the modern running light system, you can now use a modern flashing light and add a newspecial design element.
The LED technology with its many individual light sources makes it possible:If the individual LEDs light up one after the other when flashing, aoptical wiping effect, a kind of light band from the inside to the outside. Known by some well-known car manufacturers, this modern technology is now also available for the motorcycle available.
Dimensions:
Width: 68 mm
Width with stem: 82 mm
Height: 20 mm
Depth: 23 mm
Threaded bolt: M8 x 20 mm
Connections:
Yellow cable = indicator (+)
Black cable= Mass (-)
Supply:1pair
Note:
LED indicators work with less watts than standard indicators. Therefore it may be necessary to replace the original relay with a load independentrelay must be replaced.
For front / rear suitable.
Shapely flasher housing made of aluminium. Dark glass, clear edges alternating with slight curves give theIndicators a modern design. With the STS 1 LED turn signal, which fits perfectly to almost every machine, thanks to the modern running light system, you can now use a modern flashing light and add a newspecial design element.
The LED technology with its many individual light sources makes it possible:If the individual LEDs light up one after the other when flashing, aoptical wiping effect, a kind of light band from the inside to the outside. Known by some well-known car manufacturers, this modern technology is now also available for the motorcycle available.
Dimensions:
Width: 68 mm
Width with stem: 82 mm
Height: 20 mm
Depth: 23 mm
Threaded bolt: M8 x 20 mm
Connections:
Yellow cable = indicator (+)
Black cable= Mass (-)
Supply:1pair
Note:
LED indicators work with less watts than standard indicators. Therefore it may be necessary to replace the original relay with a load independentrelay must be replaced.